Nintendo says that USB-C cables you buy to charge the Switch should have 56kΩ resistors in them. This gives users some wiggle room when it comes to deciding which USB-C cables to buy, as the. If your not currently using mobile charger like this power bank its also a good idea to invest in one since it will give you the ability to charge on the go. Also be sure to subscribe to our youtube channel for more tech tips if you haven’t already. So if your Nintendo Switch won’t charge your going to want to first. How to Charge a Nintendo Switch Using a USB Cable Nyko, Apple. All models of Nintendo Switch use USB-C for the charging port on the bottom of the unit. So, in a pinch, you can charge it with any USB-C cable plugged into a power source, such as a tablet/smartphone charger, battery pack, PC, or USB hub. Check the Switch Power Cable The Switch dock is used to connect Nintendo Switch to your TV or charging. Once there isn’t enough power or the cable is inserted improperly, the Switch dock will not work as normal and trigger some issues such as Nintendo Switch dock not charging or not connecting to TV. There was a suggested procedure that you might try if you think the battery isn't recharging correctly: 1) Power cycle the console (hold the power button for 15 seconds). 2) Then turn it back on.

For several days, weeks, months or even years, you are probably too busy or has no time to play your Nintendo Switch. One day, you’ve tried to turn it on and charge it. Unexpectedly, your Nintendo Switch didn’t turn on and was stuck on a Black Charging Screen. The only display shows on the screen is a low battery indicator on the upper left corner. You might be think it’s just something to do with the battery, maybe so depleted that it didn’t turn on and just need charging.

So you’ve decided to leave it for a charge in a couple of hours. You turn it again, and boom, still stuck on the black charging screen. This time, you are a little bit worried and may be thinking that there is a problem with your Nintendo Switch hardware.

Well, Nintendo Switch requires some decent amount of battery charge for it to boot up due to its hardware components that are too powerful that it takes a lot of energy. For this reason, the switch won’t turn on when the battery was depleted for a longer period of time, and some might have minor issue that is similar to yours.

The good news is, your switch is not broken “yet”, you just have to do some tricks to turn it on again. Remember back in days during the SNES era? that if a cartridge is not working, you’ll just blow the bottom of it and it magically works? something like that.

How to Fix Stuck on Black Charging Screen

To fix it. Follow our step by step guide below.

1. First, you need to remove the Joycons from your Nintendo Switch.
2. If your Nintendo Switch is connected from a dock, remove it as well as the adapter charger.
3. Now, charge your switch directly with the adapter charger and wait for about 10 to 15 minutes to get some just for boot up.
4. Then turn off your switch by holding the power button for 12 seconds until the screen turns off.
5. Remove the charging cable from your switch and wait for about 3 to 5 seconds to cool it down.
6. Turn it on again by pressing the power button.
7. Once it’s turned on, your switch should now proceed to the Home Screen and shows a reminder message saying it needs to be charged.
8. Immediately charge your switch and it will now starts to increase its charging capacity.
9. Done!

From now on, you’re good to go and your Nintendo Switch won’t go back to the Black Charging Screen – unless you decided deplete its battery again. Once it is at least 15% in charging capacity, you can put back the Joycons to your switch.

To summarize the workaround, the Switch Dock with Joycons attached is not enough to charge your system when it is so depleted and it requires direct charging for it to work.

That’s it! Hope this guide helps you revive your precious Nintendo Switch. If you still have problem with this, please let us know in the comment section.

For several days, weeks, months or even years, you are probably too busy or has no time to play your Nintendo Switch. One day, you’ve tried to turn it on and charge it. Unexpectedly, your Nintendo Switch didn’t turn on and was stuck on a Black Charging Screen. The only display shows on the screen is a low battery indicator on the upper left corner. You might be think it’s just something to do with the battery, maybe so depleted that it didn’t turn on and just need charging.

So you’ve decided to leave it for a charge in a couple of hours. You turn it again, and boom, still stuck on the black charging screen. This time, you are a little bit worried and may be thinking that there is a problem with your Nintendo Switch hardware.

Well, Nintendo Switch requires some decent amount of battery charge for it to boot up due to its hardware components that are too powerful that it takes a lot of energy. For this reason, the switch won’t turn on when the battery was depleted for a longer period of time, and some might have minor issue that is similar to yours.

The good news is, your switch is not broken “yet”, you just have to do some tricks to turn it on again. Remember back in days during the SNES era? that if a cartridge is not working, you’ll just blow the bottom of it and it magically works? something like that.

How to Fix Stuck on Black Charging Screen

To fix it. Follow our step by step guide below.

1. First, you need to remove the Joycons from your Nintendo Switch.
2. If your Nintendo Switch is connected from a dock, remove it as well as the adapter charger.
3. Now, charge your switch directly with the adapter charger and wait for about 10 to 15 minutes to get some just for boot up.
4. Then turn off your switch by holding the power button for 12 seconds until the screen turns off.
5. Remove the charging cable from your switch and wait for about 3 to 5 seconds to cool it down.
6. Turn it on again by pressing the power button.
7. Once it’s turned on, your switch should now proceed to the Home Screen and shows a reminder message saying it needs to be charged.
8. Immediately charge your switch and it will now starts to increase its charging capacity.
9. Done!

Switch Not Charging Controller

From now on, you’re good to go and your Nintendo Switch won’t go back to the Black Charging Screen – unless you decided deplete its battery again. Once it is at least 15% in charging capacity, you can put back the Joycons to your switch.

To summarize the workaround, the Switch Dock with Joycons attached is not enough to charge your system when it is so depleted and it requires direct charging for it to work.

Switch Not Turning On

That’s it! Hope this guide helps you revive your precious Nintendo Switch. If you still have problem with this, please let us know in the comment section.